Studs, Bolts & Nuts in Stainless Steel
Five versatile austenitic stainless grades for corrosion resistance, process-industry service and elevated-temperature applications.
Stainless Steel Fastener Grades
Explore the grades shown in your reference artwork. Select a grade to view Aanuraj's website and discuss your requirement.
Stainless Steel 304
General-purpose austenitic stainless steel with good formability and broad corrosion resistance.
View Stainless Steel 304 Products ↗Stainless Steel 316
Molybdenum-bearing grade for improved pitting and crevice corrosion resistance versus 304 in many environments.
View Stainless Steel 316 Products ↗Stainless Steel 904L
High-alloy austenitic grade with nickel, molybdenum and copper for demanding chemical environments.
View Stainless Steel 904L Products ↗Stainless Steel 317L
Low-carbon molybdenum-bearing grade offering enhanced pitting and crevice corrosion resistance.
View Stainless Steel 317L Products ↗Stainless Steel 310
High chromium-nickel stainless steel selected for oxidation resistance and elevated-temperature service.
View Stainless Steel 310 Products ↗Comparative Chemical Composition
Typical specification limits, weight percent (%). “Max” indicates a maximum; ranges are shown where specified.
| Element (wt.%) | SS 304 S30400 | SS 316 S31600 | SS 904L N08904 | SS 317L S31703 | SS 310 S31000 |
|---|---|---|---|---|---|
| Carbon (C) | 0.08 max | 0.08 max | 0.020 max | 0.030 max | 0.25 max |
| Manganese (Mn) | 2.00 max | 2.00 max | 2.00 max | 2.00 max | 2.00 max |
| Silicon (Si) | 0.75 max | 0.75 max | 1.00 max | 0.75 max | 1.50 max |
| Phosphorus (P) | 0.045 max | 0.045 max | 0.045 max | 0.045 max | 0.045 max |
| Sulphur (S) | 0.030 max | 0.030 max | 0.035 max | 0.030 max | 0.030 max |
| Chromium (Cr) | 18.0–20.0 | 16.0–18.0 | 19.0–23.0 | 18.0–20.0 | 24.0–26.0 |
| Nickel (Ni) | 8.0–10.5 | 10.0–14.0 | 23.0–28.0 | 11.0–15.0 | 19.0–22.0 |
| Molybdenum (Mo) | — | 2.0–3.0 | 4.0–5.0 | 3.0–4.0 | — |
| Copper (Cu) | — | — | 1.0–2.0 | — | — |
| Nitrogen (N) | 0.10 max | 0.10 max | 0.10 max | 0.10 max | Not typically specified |
| Iron (Fe) | Balance | Balance | Balance | Balance | Balance |
Important: These are commonly published flat-product chemistry limits used for grade comparison, not a substitute for the governing raw-material/fastener specification. Product form, standard edition and permitted product-analysis variations can change limits. Confirm the actual heat analysis on the MTC. SS 310 (S31000) is distinct from low-carbon SS 310S (S31008); do not interchange their carbon limits.
Comparative Mechanical Properties
Indicative minimum room-temperature values for annealed plate, sheet and strip where the cited source provides them.
| Property | SS 304 | SS 316 | SS 904L | SS 317L | SS 310 / 310S reference |
|---|---|---|---|---|---|
| Tensile strength (MPa), min. | 515 | 515 | 490 | 515 | 515 |
| 0.2% proof / yield strength (MPa), min. | 205 | 205 | 220 | 205 | 205 |
| Elongation (%), min. | 40 | 40 | 35 | 35 | 40 |
| Hardness (max.) | 201 HB / 92 HRB | 217 HB / 95 HRB | 90 HRB | 217 HB / 95 HRB | 217 HB / 95 HRB* |
Critical fastener note: The values above are not bolt/nut proof-load or finished-fastener acceptance values. They are indicative annealed flat-product reference values collated from published grade tables. Fastener mechanical requirements depend on the applicable bolting standard, class, diameter, product form, manufacturing route and heat-treatment condition. For SS 310, the displayed values are a 310S/310-family reference; confirm exact S31000 requirements against the purchase specification before use.
Solution Annealing – Grade Comparison
Indicative temperature references for solution treatment. Actual furnace cycle and cooling rate must follow the applicable material/product specification and qualified procedure.
| Grade | UNS | Indicative solution-annealing temperature | Cooling practice | Purpose |
|---|---|---|---|---|
| SS 304 | S30400 | Approx. 1010–1120°C; ASTM A480 reference minimum around 1040°C | Rapid cooling; water or rapid air depending section/specification | Dissolve carbides; restore solution-treated austenitic structure |
| SS 316 | S31600 | Approx. 1040–1175°C | Air cool or water quench depending section thickness; rapid passage through sensitization range | Restore corrosion resistance after fabrication/cold work |
| SS 904L | N08904 | Approx. 1060–1140°C (manufacturer reference) | Rapid water quench / rapid cooling as specified | Dissolve precipitates and maintain corrosion-resistant structure |
| SS 317L | S31703 | Approx. 1120–1160°C (manufacturer reference) | Air cool or water quench depending section; rapid cooling | Solution anneal high-Mo austenitic grade |
| SS 310 | S31000 | Approx. 1050°C minimum reference for 309/310 family; verify product standard | Rapid cooling, typically water quench or approved rapid cooling | Solution treat high-temperature austenitic grade |
5 Reasons to Choose Aanuraj
Industrial fasteners are more than a grade designation. Control the material, process, dimensions and documentation.
Material Verification
PMI and MTC review to support grade identity and heat/lot traceability as required.
Dimensional Inspection
Thread, pitch, length, across-flats and critical dimensions checked against agreed drawings and standards.
Manufacturing Focus
Hot forging, CNC machining and thread processing selected to suit component geometry and grade.
Quality Documentation
Inspection records, test reports and third-party inspection coordination as agreed in the order.
Responsive Partnership
Technical coordination from enquiry and drawing review through production and dispatch.
PMI & Material Assurance
Confirm material identity using suitable verification methods and review of material certificates.
Precision Measurement
Check dimensions and thread quality with calibrated measuring instruments and gauges.
Process & Traceability
Connect raw material, production batch, inspection and dispatch records for order traceability.
Industries & Applications
Choose the grade only after evaluating the actual media, temperature, stress, design and service conditions.
Need help selecting the right stainless steel grade?
Send your drawing, material grade, size, quantity and service conditions to our technical team.