Call Us : +91-9022702227 info@aanuraj.com
Stainless Steel 904L Stud Bolts, Nuts & Fasteners | Aanuraj Fasteners
AANURAJ FASTENERS PVT. LTD.

Stainless Steel & High-Nickel Industrial Fasteners

Stainless Steel 904L Stud Bolts, Hex Bolts, Nuts & Threaded Rods

Engineered for demanding corrosive environments, Stainless Steel 904L (UNS N08904 / EN 1.4539) is a low-carbon, high-alloy austenitic stainless steel containing elevated chromium, nickel, molybdenum and copper. Aanuraj Fasteners manufactures and supplies precision threaded fasteners in 904L to customer drawings and agreed material and inspection requirements.

Material identification: 904L is identified as UNS N08904 and EN 1.4539. The exact product specification, product form, dimensions, class, mechanical requirements and acceptance criteria must be stated in the purchase order. Do not assume that a generic 904L chemistry certificate alone establishes compliance with a particular bolting standard.

Key features of SS 904L fasteners

High alloy corrosion resistance

Chromium and molybdenum contribute to resistance against general corrosion, pitting and crevice corrosion in many aggressive media.

Nickel and copper enriched

High nickel supports resistance to chloride stress-corrosion cracking; copper improves performance in selected reducing acids, including certain sulphuric-acid environments.

Low carbon austenitic grade

Low carbon content helps reduce sensitization risk during welding and thermal exposure. 904L is not hardenable by conventional heat treatment.

Chemical composition of 904L (UNS N08904)

The following limits are commonly published for UNS N08904 chemistry. Values are weight percent (%). Always confirm the governing material specification and the actual heat analysis on the material test certificate (MTC).

ElementSpecification range / maximum (%)Role in the alloy
Carbon (C)0.020 maxLow carbon helps reduce sensitization risk
Chromium (Cr)19.00–23.00Supports passivation and corrosion resistance
Nickel (Ni)23.00–28.00Supports austenitic structure and chloride SCC resistance
Molybdenum (Mo)4.00–5.00Improves pitting and crevice corrosion resistance
Copper (Cu)1.00–2.00Improves resistance in selected reducing acid media
Manganese (Mn)2.00 maxComposition control
Silicon (Si)1.00 maxDeoxidation / composition control
Phosphorus (P)0.045 maxResidual element limit
Sulphur (S)0.035 maxResidual element limit
Nitrogen (N)0.10 maxComposition control
Iron (Fe)BalanceBase metal

Mechanical properties of 904L

Indicative room-temperature values commonly published for solution-annealed 904L material are shown below. These are reference values for the cited material condition/product forms—not a universal guarantee for every finished fastener. Fastener acceptance must follow the applicable product standard, size range, ordered condition and test requirements.

PropertyIndicative reference valueUnit
0.2% proof / yield strength≥ 220MPa (N/mm²)
Tensile strength≥ 490MPa (N/mm²)
Elongation≥ 35%
Hardness< 90HRB (reference value)
DensityApprox. 8.0g/cm³
Modulus of elasticityApprox. 195GPa
Important for procurement: Mechanical properties vary with product form, size, manufacturing route and governing specification. Request the MTC and confirm the required tensile test, proof/yield test, elongation, hardness and any supplementary tests before order acceptance.

Solution annealing heat-treatment cycle

904L is normally supplied in a solution-annealed condition. A commonly published solution-annealing range is approximately 1080–1150°C, followed by rapid cooling. Some technical datasheets publish a broader 1050–1150°C range. The approved procedure and governing product specification take precedence.

1. PreparationVerify heat number, material identity, load arrangement, furnace condition and calibrated temperature instrumentation.
2. HeatingHeat uniformly to the approved solution-annealing temperature, typically within the published 1080–1150°C range.
3. SoakingHold only for the qualified time based on actual metal temperature, section size, load mass and applicable procedure. Do not apply one fixed soak time to every diameter.
4. Rapid coolingRapidly cool, commonly by water quenching or another approved rapid-cooling method, as required by the product specification and procedure.

904L cannot be hardened by conventional quench hardening. Heat treatment is intended to establish the solution-annealed condition, not to create martensitic hardness. Record furnace chart, calibration status, load identification, actual cycle, quench details and inspection results. Avoid uncontrolled slow cooling through temperature ranges that may cause undesirable precipitation.

Manufacturing and quality-control process

Material verification

Review MTC, heat number, grade designation and chemical composition. Use PMI as an additional identification check where specified.

Forming and machining

Cutting, forging, CNC machining and thread rolling or machining are selected according to component geometry and approved manufacturing route.

Inspection and traceability

Check dimensions, thread fit, surface condition, marking and specified mechanical properties. Maintain heat/lot traceability and inspection records.

Applications of 904L fasteners

904L may be selected for equipment and connections exposed to certain aggressive chemical and process environments, subject to a corrosion review of the actual operating conditions.

Chemical ProcessingSulphuric Acid EquipmentPetrochemicalPharmaceuticalPulp & PaperHeat ExchangersDesalinationWater ManagementFlue Gas CleaningMarine Equipment

Material selection must consider acid concentration, temperature, chloride level, flow, crevice geometry, stress, galvanic coupling and cleaning chemicals. 904L is not corrosion-proof in every environment; for example, severe aerated seawater and specific chloride conditions require careful evaluation.

Aanuraj customer experience: 20 years of repeat supply

A cooling tower manufacturer has been associated with Aanuraj for nearly 20 years, continuing to purchase the same fastener products as a regular customer. This long-standing relationship reflects the importance of consistent product quality, dependable supply and responsive service in cooling-tower projects. For us, repeat business is earned through performance over time—not just a single successful dispatch.

Frequently asked questions

What is the equivalent designation of SS 904L?

Common designations include UNS N08904 and EN 1.4539. Confirm the exact standard and product form required for the order.

Is 904L better than SS 316?

904L generally offers higher resistance to many corrosive environments than 316 because of its higher nickel and molybdenum content and copper addition. Suitability still depends on the exact process chemistry and service conditions.

Can 904L be hardened by heat treatment?

No. 904L is an austenitic stainless steel and is not hardenable by conventional heat treatment. It can work-harden during cold deformation.

What is the solution-annealing temperature for 904L?

Common technical references publish approximately 1080–1150°C, followed by rapid cooling. The approved procedure and applicable product specification determine the actual cycle.

What documents can be requested with 904L fasteners?

Depending on the purchase order: material test certificate, heat-number traceability, dimensional inspection report, PMI report, mechanical test report and third-party inspection documentation.

Request a technical quotation

Share your required fastener type, diameter, length, thread standard, quantity, drawing, operating environment and inspection/documentation requirements. Our team can review the requirement and confirm the applicable material and manufacturing route.

Aanuraj Fasteners Pvt. Ltd.
Website: www.aanuraj.com
Email: sales@aanuraj.com
Phone: +91 90227 02227

Technical disclaimer: This page is an educational product overview, not a substitute for licensed standards, customer drawings, engineering approval or a qualified heat-treatment procedure. Confirm current standard editions, chemistry, mechanical properties, heat treatment, testing and acceptance criteria for the exact fastener product form and purchase order. Corrosion performance depends on service conditions and must be assessed by the responsible design/materials engineer.