Call Us : +91-9022702227 info@aanuraj.com
Stainless Steel SS 310 Studs, Bolts & Nuts | Aanuraj Fasteners
High-performance stainless steel fasteners

Stainless Steel SS 310
Studs | Bolts | Nuts

High Temperature & Oxidation Resistant Fasteners for Demanding Industrial Applications

♨
High Temperature StrengthExcellent resistance up to ~1100°C in suitable oxidizing service.
⬡
Oxidation ResistanceReliable performance in oxidizing and carburizing atmospheres.
▱
Long Service LifeStable performance in continuous high-heat applications.
SS 310 stainless steel studs and hex bolts marked AANURAJ SS 310

Chemical Composition (Typical, wt.%) – SS 310

ElementComposition
Carbon (C)≤ 0.25
Chromium (Cr)24.0 – 26.0
Nickel (Ni)19.0 – 22.0
Manganese (Mn)≤ 2.00
Silicon (Si)≤ 1.50
Phosphorus (P)≤ 0.045
Sulphur (S)≤ 0.030
Nitrogen (N)≤ 0.10
Iron (Fe)Balance

Mechanical Properties (Typical, Solution Annealed) – SS 310

PropertyValue (Metric)Value (Imperial)
Tensile Strength (UTS)≥ 515 MPa≥ 75 ksi
Yield Strength (0.2% Offset)≥ 205 MPa≥ 30 ksi
Elongation (Min.)≥ 40%≥ 40%
Hardness (Typical)≤ 217 HB≤ 95 HRB

SS 310 – Key Features

✓ Excellent high-temperature strength

✓ Superior resistance to oxidation and scaling

✓ Good toughness and creep resistance

✓ Suitable for continuous high-heat operations

Reference values reproduced from the supplied design. Actual acceptance values depend on the applicable product/fastener specification, product form, size, condition and purchase-order requirements. Confirm against the material test certificate (MTC).

Industrial solution annealing furnace

Solution Annealing Process – SS 310

Solution annealing is used to achieve a suitable austenitic structure and support corrosion resistance and ductility. Follow the governing material specification and qualified heat-treatment procedure.

ProcessTemperatureHolding TimeCooling
Solution Annealing1040–1120°C (1900–2050°F)30–60 minutes (depending on section size)Rapid cooling (water quench / air blast)

The temperature/time details above are transcribed from the supplied reference design. Validate the correct cycle for the actual SS 310 product form and section size before production; do not treat this graphic as a qualified heat-treatment procedure.

Why Choose Aanuraj?

PMI material verification

Material Assurance – PMI

Positive Material Identification for grade verification and material traceability, as specified by the order.

Technician checking fastener with vernier caliper

Dimensional Precision

In-process and final dimensional checks using calibrated vernier calipers and gauges.

Aanuraj stainless steel fasteners

Reliable Partner

Quality-focused manufacturing, traceability, inspection documentation and dependable supply.

Applications

♨Furnaces & Heat Treatment Plants
♨Power Plants
⚗Petrochemical & Chemical Plants
⚙Industrial Pumps
▤Heat Exchangers
♜Kilns & High-Temperature Equipment

Case Study – Pump Manufacturer

Industrial pump assembly

SS 310 Hex Bolts & Nuts for a Pump Manufacturer

A leading industrial pump manufacturer required corrosion- and temperature-resistant fasteners for pump casings used in high-temperature service. Aanuraj supplied SS 310 hex bolts and nuts in the required sizes with material traceability and inspection documentation. The fasteners supported reliable assembly and repeat supply for the customer's pump product range.

Frequently Asked Questions (FAQ)

What is stainless steel 310?

SS 310 is an austenitic chromium-nickel stainless steel used for elevated-temperature service and oxidation resistance.

What temperature can SS 310 fasteners withstand?

Temperature capability depends on atmosphere, load, component design and service duration. Confirm suitability with the design engineer for the actual operating conditions.

What are the advantages of SS 310 over SS 304 / SS 316?

SS 310 has higher chromium and nickel content and is generally selected for better high-temperature oxidation resistance. It is not a universal replacement for 304 or 316.

Does Aanuraj provide material test certificates?

MTC and other inspection documents can be supplied as agreed in the purchase order.

What sizes and products are available in SS 310?

Share the required diameter, length, thread form, drawing and quantity for confirmation of manufacturing feasibility.

Technical note: This page follows the layout and reference information in the supplied infographic. Confirm chemistry, mechanical requirements, heat-treatment cycle, test methods and acceptance criteria against the current governing standard, actual MTC and approved purchase order before manufacturing or inspection.