High Nickel Alloy Studs, Bolts & Fasteners
Specialised studs, bolts, nuts and washers in high-performance nickel alloys, duplex stainless steels and high-temperature fastener materials.
High Nickel Alloy Fasteners for Critical Industrial Applications
Aanuraj Fasteners supplies high nickel alloy studs, bolts, nuts and threaded fasteners for demanding service conditions. Our featured special alloy range includes Hastelloy C-276 fasteners, Hastelloy C-22 bolts and nuts, Super Duplex UNS S32750, Duplex 2205 and ASTM A453 Grade 660 fasteners.
Explore nickel alloy stud bolts, corrosion-resistant industrial fasteners and high-performance bolting solutions for oil and gas, chemical processing, petrochemical plants, power generation and other critical applications. Select a material grade below to view its dedicated Aanuraj product page.
Exotic Materials & Fastener Grades
Select a material to view the dedicated Aanuraj product page, grade details and available fastener range.
Hastelloy C-276
Nickel–molybdenum–chromium alloy fasteners for demanding corrosive process environments.
Explore grade & products ↗Hastelloy C-22
Nickel–chromium–molybdenum alloy fasteners for severe chemical and process service.
Explore grade & products ↗Super Duplex 2507
High-strength duplex stainless fasteners for chloride-rich and offshore environments.
Explore grade & products ↗Duplex 2205
Duplex stainless fasteners combining high strength with resistance to chloride-related corrosion.
Explore grade & products ↗ASTM A453 Grade 660
Precipitation-hardening austenitic fasteners for high-temperature, high-load bolting applications.
Explore grade & products ↗Comparative Chemical Composition
Indicative composition ranges in weight percent for the five featured alloys. Nickel is balance where shown.
| Element (wt.%) | Hastelloy C-276 | Hastelloy C-22 | Super Duplex 2507 | Duplex 2205 | Grade 660 / A-286 |
|---|---|---|---|---|---|
| Nickel (Ni) | Balance | Balance | 6.0–8.0 | 4.5–6.5 | 24.0–27.0 |
| Chromium (Cr) | 14.5–16.5 | 20.0–22.5 | 24.0–26.0 | 22.0–23.0 | 13.5–16.0 |
| Molybdenum (Mo) | 15.0–17.0 | 12.5–14.5 | 3.0–5.0 | 3.0–3.5 | 1.0–1.5 |
| Iron (Fe) | 4.0–7.0 | 2.0–6.0 | Balance | Balance | Balance |
| Tungsten (W) | 3.0–4.5 | 2.5–3.5 | — | — | — |
| Manganese (Mn) | 1.0 max | 0.5 max | 1.2 max | 2.0 max | 2.0 max |
| Carbon (C) | 0.010 max | 0.015 max | 0.030 max | 0.030 max | 0.08 max |
| Nitrogen (N) | — | — | 0.24–0.32 | 0.14–0.20 | — |
| Titanium (Ti) | — | — | — | — | 1.90–2.35 |
| Aluminium (Al) | — | — | — | — | 0.35 max |
Values are typical specification limits / grade ranges compiled for material identification, not a substitute for the applicable ASTM/ASME product specification. Duplex chemistry varies by UNS grade and product standard; Grade 660 chemistry is for A-286 / UNS S66286. Confirm every heat against its Mill Test Certificate (MTC).
Comparative Mechanical Properties
Indicative room-temperature reference values for solution-treated or specified heat-treated product forms. Fastener acceptance values depend on the governing product specification, diameter and class.
| Property | Hastelloy C-276 | Hastelloy C-22 | Super Duplex 2507 | Duplex 2205 | Grade 660 Class A* |
|---|---|---|---|---|---|
| 0.2% Yield Strength (MPa) | ≥ 283 | ≥ 310 | ≥ 550 | ≥ 450 | ≥ 585 |
| Tensile Strength (MPa) | ≥ 690 | ≥ 690 | ≥ 800 | ≥ 620 | ≥ 895 |
| Elongation (%) | ≥ 40 | ≥ 45 | ≥ 15 | ≥ 25 | ≥ 15 |
| Hardness | Product-form dependent | Product-form dependent | Typically ≤ 32 HRC (specification dependent) | Typically ≤ Work/standard dependent | 248–341 HBW (datasheet range) |
*Grade 660 Class A values shown as a reference from a Grade 660 Class A datasheet; other classes and product sizes can have different requirements. Nickel-alloy and duplex figures are reference minima commonly published for bar/plate forms, not a blanket guarantee for threaded fasteners. Use the exact fastener standard and certified MTC for design and acceptance.
Solution Annealing – Grade Comparison
Heat-treatment guidance varies with product form, section size, specification and supplier procedure. Grade 660 is solution treated and age hardened, not simply solution annealed.
| Material | Typical solution / annealing temperature | Cooling / subsequent treatment | Important note |
|---|---|---|---|
| Hastelloy C-276 | Approx. 1121°C (2050°F) | Rapid cooling; water quench advised | Haynes recommends a 10–30 minute hold depending on section thickness. |
| Hastelloy C-22 | Approx. 1121°C (2050°F) | Water quench advised; rapid air cooling may suit thin sections | Haynes recommends a 10–30 minute hold depending on thickness. |
| Super Duplex 2507 | Approx. 1080–1120°C | Rapid cooling / water quench | Control phase balance and avoid prolonged exposure in precipitation ranges. |
| Duplex 2205 | Typically approx. 1020–1100°C | Rapid cooling / water quench | Exact solution treatment depends on product specification and section. |
| ASTM A453 Grade 660 / A-286 | Solution treatment approx. 900°C | Liquid quench, then age harden; a common schedule is 720°C for 16 h followed by air cooling | Follow the ordered class / ASTM A453 heat-treatment route; aging is essential for the specified strength condition. |
These are general reference schedules, not shop-floor instructions. Do not heat treat production fasteners from this table alone. Follow the current governing standard, material supplier procedure, approved process route and customer specification.
5 Reasons to Choose Aanuraj
Special-grade fastener supply needs more than a grade name. Material identity, manufacturing control and documentation must align with the project specification.
Special Material Focus
Experience with stainless, duplex, super duplex and high-nickel alloy threaded fasteners.
Forging & Threading
Hot forging, CNC machining and thread rolling capabilities for project-specific fastener requirements.
Material Verification
PMI and material documentation can be arranged according to the purchase specification.
Inspection Support
Inspection and third-party inspection coordination against agreed quality and project requirements.
Application-led Support
Discuss grade, standard, size, service conditions and documentation before order finalisation.
Industries & Applications
Exotic alloy and duplex fasteners are selected where corrosion, pressure, temperature or strength requirements are demanding.
Fastener Product Range
- Studs and fully threaded stud bolts
- Hex bolts and heavy hex bolts
- Hex nuts and heavy hex nuts
- Washers and project-specific threaded components
- Custom dimensions subject to drawing and material review
Industries & Applications
Designed for demanding industrial procurement and engineering requirements.
Engineering & Technical Considerations
- Confirm exact UNS / alloy designation and governing fastener specification.
- Review chemistry, mechanical requirements and product form.
- Specify heat treatment / class requirements where applicable.
- Check dimensions, thread form, finish and service environment.
- Verify inspection and documentation requirements before order release.
Quality & Documentation
- Material Test Certificate (MTC) as required by order
- Positive Material Identification (PMI) where specified
- Third-party inspection coordination as per project requirement
- Traceability and inspection records subject to purchase specification
- Final acceptance against the applicable standard and approved documents
Need technical support for exotic grade fasteners?
Share your grade, size, standard, quantity and service conditions with Aanuraj.