Chemical Composition @ UNS N06225:

UNS N06225	Ni	C	Al	Mn	Si	Fe	S	P	Cr
	58.00 min.	0.10 max	0.40 max.	0.50 max	0.50 max	5.00 max	0.015 max	0.015 max	20.00 – 23.00

Mechanical Properties:

@  UNS N06225 Grade 1 Annealed.

Size Inch, Metric	Yield Strength (0.2%Offset) ksi	Tensile Strength ksi	Elongation
UPTO DIA .4″, 102mm	60	120	30 %

  Forging quality is furnished to chemical requirements and surface inspection .only. No tensile properties are required. Forging stock is typically supplied in the hot worked condition,

Annealed 1600°F (871°C) minimum.

Mechanical Properties:

@ B446 N06225 Grade 2 Solution Annealed

Size	Tensile Strength min.	Yield Strength (0.2%Offset)	Elongation
All dia.	100 ksi	40 ksi	30 %

   Solution annealed at 2000°F (1093°C) minimum, with or without subsequent

 stabilization anneal at 1800°F (982°C) minimum to increase resistance to sensitization.

Equivalent Standards:

STANDARD	UNS	BS	European
Alloy 625	UNS N06225	BS 3076 NA 21	2.4856

 

          AF Aanuraj Inconel 625 Threaded Fasteners are used in the following applications:

•          Equipment for handling seawater –  heat exchangers, cooling water systems, ballast water systems, firefighting systems etc.
•          Equipment in pulp bleaching plants.
•          Components in gas cleaning systems.

​         Also in following Industries it’s widely used.

Industrial categories	Petrochemical Industries
Chemical industry	Pulp & Paper Industries
Petrochemical industry	Oil & Gas Industries